Mar 11, This is another product that allows for removal and installation of rear axle bushes on the Mk6 Fiesta with relative ease. Minimal dismantling is required, with the bushes being removed from the trailing arm without taking the whole assembly off the vehicle.
Jul 31, Realistically, will I be able to remove and replace these on my 05 plate fiesta? Got a dull knocking sound from the rear, which has been fixed by replacing the rear shocks so presume its the rear axle bush. I know they sell tools to get these out but is it possible to remove them without this? Nov 25, Have you found excessive movement, remember bushes do need an certain amount of compliance to work effectively.
As is there nature. If there unbonding or pulled right out of course there shot. Karl. Mechanic. Posts: 7, fiesta mk7 rear axle bushes worn. Nov 27, at pm via Tapatalk studabear likes this.
You could use another pair of stands if you have them.
Mar 20, Replacement can generally be done on the vehicle, with the right tools, requiring only minimal suspension dismantling and removal. New suspension bushings will bring about a return in ride quality, allow the vehicle to sail through future MOT’s and return those great driving characteristics that define the Ford Fiesta. Jul 08, Remove the twist beam from the jacks and place it on some thick cardboard and drag it out from under the vehicle.
Remove the two 12mm bolts and then remove the twist beam brackets. View attachment Now you can remove the bushes. I use a 3/4 drive 2" socket and a 8 pound hammer and drove the bushes out.
I bought an M12 by mm stainless steel bolt and M12 stainless extended nut.
They were really not very tight. Sep 19, 1) from the rear of the car slide your jack under the car until it's under the rear beam. Raise the jack until it's just touching the beam. 2) Place blocks or stands under the beam to support it.